Publicidad
Equipment Modifications
This equipment must be installed and used in strict accordance
with the instructions given in the user documentation. This
equipment contains no user-serviceable components.
Unauthorized equipment changes or modifications will
invalidate all applicable regulatory certifications and approvals.
Liability
Every care has been taken in the preparation of this document.
Please inform your local Axis office of any inaccuracies or
omissions. Axis Communications AB cannot be held responsible
for any technical or typographical errors and reserves the right
to make changes to the product and documentation without
prior notice. Axis Communications AB makes no warranty of any
kind with regard to the material contained within this
document, including, but not limited to, the implied warranties
of merchantability and fitness for a particular purpose. Axis
Communications AB shall not be liable nor responsible for
incidental or consequential damages in connection with the
furnishing, performance or use of this material. This product is
only to be used for its intended purpose.
Support
Should you require any technical assistance, please contact your
Axis reseller. If your questions cannot be answered immediately,
your reseller will forward your queries through the appropriate
channels to ensure a rapid response. If you are connected to the
Internet, you can:
• download user documentation and software updates
• find answers to resolved problems in the FAQ database. Search
by product, category, or phrase
• report problems to Axis support staff by logging in to your
private support area
• chat with Axis support staff (selected countries only)
• visit Axis Support at www.axis.com/techsup/
Regulatory Information
Europe
This product complies with the applicable CE marking
directives and harmonized standards:
• Restrictions of Hazardous Substances (RoHS) Directive
2011/65/EU. See Disposal and Recycling below.
A copy of the original declaration of conformity may be obtained
from Axis Communications AB, Emdalavägen 14, SE-223 69
Lund.
Disposal and Recycling
When this product has reached the end of its useful life, dispose
of it according to local raws and regulations. For information
about your nearest designated collection point, contact your
local authority responsible for waste disposal. In accordance
with local legislation, penalties may be applicable for incorrect
disposal of this waste.
Europe
This symbol means that the product shall not be
disposed of together with household or commercial
waste. Directive 2012/19/EU on waste electrical and
electronic equipment (WEEE) is applicable in the
European Union member states. To prevent potential
harm to human health and the environment, the product must
be disposed of in an approved and environmentally safe
recycling process. For information about your nearest designated
collection point, contact your local authority responsible for
waste disposal. Businesses should contact the product supplier
for information about how to dispose of this product correctly.
This product complies with the requirements of Directive
2011/65/EU on the restriction of the use of certain hazardous
substances in electrical and electronic equipment (RoHS).
China
This product complies with the requirements of the
legislative act Administration on the Control of
Pollution Caused by Electronic Information Products
(ACPEIP).
Safety
This product complies with IEC/EN/UL 60950-1, Safety of
Information Technology Equipment.
Contact Information
Axis Communications AB
Emdalavägen 14
223 69 Lund
Sweden
Tel: +46 46 272 18 00
Fax: +46 46 13 61 30
www.axis.com
English
Safeguards
Please read through this Installation Guide carefully before
installing the Axis product. Keep the Installation Guide for
further reference.
• Store the Axis product in a dry and ventilated environment.
• Avoid exposing the Axis product to vibration, shocks or heavy
pressure. Do not install the product on unstable brackets,
unstable or vibrating surfaces or walls, since this could cause
damage to the product.
• Only use applicable tools when installing the Axis product;
excessive force could cause damage to the product.
• Do not use chemicals, caustic agents, or aerosol cleaners. Use
a damp cloth for cleaning.
• Use only accessories that comply with technical specification
of the product. These can be provided by Axis or a third party.
• Use only spare parts provided by or recommended by Axis.
• Do not attempt to repair the product by yourself, contact Axis
or your Axis reseller for service matters.
• This Axis product shall be used in compliance with local laws
and regulations.
• The Axis product should be installed by a trained professional.
Observe relevant national and local regulations for the
installation.
Transportation
• When transporting the Axis product, use the original
packaging or equivalent to prevent damage to the product.
Dome Cover Cleaning
• Be careful not to scratch or damage the dome cover. Do not
clean a dome cover that looks clean to the eye and never
polish the surface. Excessive cleaning could damage the
surface.
• For general cleaning of a dome cover it is recommended to use
a non-abrasive, solvent-free neutral soap or detergent with
water and a soft cloth. Rinse well with clean lukewarm water.
Dry with a soft cloth to prevent water spotting.
• Never use harsh detergents, gasoline, benzene or acetone etc.
and avoid cleaning in direct sunlight or at elevated
temperatures.
Publicidad
