GE IM-4D Manual Del Propietário página 11

MOUNT THE ICEMAKER
9
• Lift the icemaker so the fill tube assembly (11 or 12
depending on model) fits in the fill cup opening (D).
Hang the icemaker on the two mounting screws (B).
Make sure:
• The power cord is still firmly in the socket.
• The fill tube assembly (11 or 12 depending on
of the icemaker. (Check the rear of the refrigerator
to make sure the fill tube has not been pushed out
of the back of the refrigerator).
• The icemaker mounting screws are located in the
uppermost position of the mounting slots on the
icemaker bracket.
• The icemaker is level.
• The icemaker power switch is in the OFF position.
SECURELY TIGHTEN THE ICEMAKER MOUNTING
SCREWS.
INSTALL THE ICE BUCKET
10
Place the ice bucket (8) under the icemaker.
Installation Instructions
11 12
B
D
8
ATTACH WARRANTY LABEL
11
A label (7) is provided with this kit to record the date of
installation for warranty purposes. Apply it to the back
of the refrigerator.
KEEP THIS MANUAL
12
The warranty for the icemaker is printed in this
manual. Keep this manual with your Refrigerator
Owner's Manual.
The icemaker installation inside the freezer is now
complete. Continue to the Water Valve Assembly
section on page 14.
11