Important Safeguards - GE 106757 Manual De Instrucciones

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should always be
followed, including the following:
1. Read all instructions.
2. To protect against risk of electrical
shock, do not immerse blender, its
cord or plug in water or other
liquid.
3. This appliance should not be used
by children and care should be
taken when used near children.
4. Unplug from outlet when not in
use, before putting on or taking off
parts, and before cleaning.
5. Do not operate any appliance with a
damaged cord or plug, or after
appliance malfunctions, or after the
appliance has been dropped or
damaged in any manner. Call
Customer Service (see warranty) to
return for examination, repair or
electrical or mechanical adjustment.
6. The use of accessory attachments
not recommended or sold by the
manufacturer may result in fire,
electrical shock or personal injury.
7. Do not use outdoors.
8. Do not let cord hang over the edge
of table or counter, or touch hot
surfaces including the stove.
9. Keep hands and utensils out of
container while blending to prevent
the possibility of severe injury to
persons or damage to the unit. A
scraper may be used but must be
used only when the unit is not
running.
10. Do not use appliance for other than
intended use.
SAVE THESE INSTRUCTIONS!
2
11. When mixing liquids, especially hot
liquids, use a tall container or make
small quantities at a time to reduce
spillage.
12. Blades are sharp. Handle carefully.
13. Avoid contact with moving parts.
14. Keep hands and utensils away from
the chopper cutting blade while
chopping food to reduce the risk of
severe injury to persons or damage
to the food chopper. A scraper may
be used but only when the food
chopper is not running.
15. Be certain food chopper cover is
securely locked in place before
operating appliance. Do not
attempt to remove cover until blade
has stopped rotating.
16. Check food chopper bowl for
presence of foreign objects before
using.
17. To reduce the risk of injury, never
place chopper attachment cutting
blade on base without first putting
bowl properly in place. Always place
the motor housing on the chopper
attachment after the cover is in
place on the bowl. Remove the
motor housing from the chopper
attachment before removing the
cover from the bowl.