QSC HF-75BX1 Manual De Instrucciones página 2

Connections
The HF-75BX1/X2 has barrier strip screw terminals that accept up to #10 AWG (6mm
INPUT Terminals
Connect the amplifier's full range output signal to the HF-75BX1 or HF-75BX2 INPUT terminals. Observe proper polarity; the amplifier's + signal to the
HF-75BX1 or HF-75BX2 + INPUT, the amplifier's
the application.
HF OUT Terminals
The HF OUT terminals are factory-connected to the compression driver. These terminals should ONLY be connected to the HF-75BX1 or HF-75BX2 com-
pression driver. Observe proper polarity; the + HF OUT signal to the compression driver's + input, the
LF OUT Terminals
The HF-75BX1 is designed specifically for use with QSC's LF-3115 low frequency loudspeaker and the HF-75BX2 for the LF-3215 loudspeaker. The LF
OUT terminals are factory-terminated to lead wires with spade-lugs. These should ONLY be connected to QSC's model LF-3115 or model LF-3215 low
frequency loudspeaker. Observe proper polarity; connect the + LF OUT signal to the low frequency loudspeaker's + input, the
-
frequency loudspeaker's
HF OUT connection
terminals. Connect to
compression driver.
HF-75BX1 or
HF-75BX2 INPUT
connection terminals
2
-
signal to the HF-75BX1 or HF-75BX2
input.
2
) stranded loudspeaker wire.
-
INPUT. Use the largest wire size and shortest wire length for
Compression Driver
To LF-3115 or LF-3215
LF OUT connection
terminals. Connect to
LF-3115 or LF 3215
loudspeaker INPUT
terminals.
Amplifier
-
HF OUT signal to the compression driver's
-
LF OUT signal to the low
The HF-75BX1 is designed
specifically for use with
QSC's LF-3115 low
frequency loudspeaker and
the HF-75BX2 for the
LF-3215 loudspeaker.
-
input.