QSC HF-75BX1 Manual De Instrucciones página 3

HF-75BX1 and HF-75BX2 Specifications
Frequency Range:
Nominal Coverage:
DI:
Q:
SPL (peak):
Impedance:
Maximum Input Power:
(2 hours of 6 dB crest factor
pink noise, 50 Hz – 20 kHz,
AES method)
Sensitivity:
Crossover Frequency:
Connectors:
Transducers:
Mounting Hardware:
Size:
Weight:
(subject to change without notice)
1,300 - 16,000 Hz (-6 dB)
90° horizontal X +15 to -35° vertical (50° total, adjustable mount provides for vertical plane adjustments. The hori-
zontal plane can be adjusted by altering mounting position on the low frequency enclosure before tightening bolts.
9.0 dB (600 to 16,000 Hertz average)
8.0 (600 to 16,000 Hertz average)
HF-75BX1 with LF-3115: 123 dB
HF-75BX2 with LF-3215: 126 dB
HF-75BX1 with LF-3115: 8 Ohms nominal
HF-75BX2 with LF-3215: 4 Ohms nominal
HF-75BX1 with LF-3115: 150 W
HF-75BX2 with LF-3215: 300 W
HF-75BX1 with LF-3115: 95.0 dB
HF-75BX2 with LF-3215: 97.5 dB
1,300 Hz
Barrier strip screw terminals accept up to #10 AWG (6mm
minals, two HF OUT terminals (factory wired to compression driver), and two LF OUT terminals with factory sup-
plied wiring for connection to QSC LF-3115 or LF-3215 low frequency loudspeaker.
1.4" (35mm) exit, 3.0" (76mm) voice coil, titanium diaphragm compression driver
Attaches to top of the LF-3115 or LF-3215 low frequency cabinet using three M8, 20mm long bolts.
30" wide X 16" high X 20" deep (762mm X 406mm X 508mm)
36 lbs. (shipping), 26 lbs. (net), 16.3/11.8 kilograms
2
) stranded wire. Six terminals: Two full-range input ter-
3