Westin Automotive Products 25-3120 Manual De Instrucciones

AUTOMOTIVE PRODUCTS, INC.
STEP BAR ASSEMBLIES
ENSAMBLES DE ESTRIBOS
MONTAGES DE MARCHE-PIEDS
25-3120
25-3125
26-3120
26-3125
ITEM QTY
1,2 2 STEP BAR, PASSENGER (1) AND DRIVER (2)
3 4 MOUNT ASSEMBLY
4 8 3/8-16 X 1.00" BUTTON HEAD BOLT
5 8 3/8" INTERNAL TOOTH LOCK WASHER
6 8 M8-1.25 X 30MM HEX HEAD BOLT
7 8 3/8" LOCK WASHER
8 8 3/8" FLAT WASHER
1,2 2 ESTRIBOS, LADO DEL ACOMPAÑANTE
3 4 ENSAMBLES PARA MONTAJE
4 8 PERNOS TERMINALES DE 3/8-6 X 1.00"
5 8 ARANDELAS DE PRESIÓN DE DENTADO INTERIOR DE 3/8"
6 8 PERNOS CON CABEZA HEXAGONAL M8-1,25 X 30 MM
7 8 ARANDELAS DE PRESIÓN DE 3/8"
8 8 ARANDELAS PLANAS DE 3/8"
1,2 2 MARCHE-PIEDS
3 4 ENSEMBLE DE MONTAGE
4 8 BOULON A TETE RONDE DE 3/8-16 X 1,00 PO
5 8 RONDELLE A FREIN A DENTS INTERIEURES 3/8 PO
6 8 BOULONS A TETE HEXAGONALE M8-1,25 X 30MM
7 8 RONDELLE A FREIN DE 3/8
8 8 RONDELLE PLATE 3/8 PO
Remove the contents from box and check for damage. Verify all parts are present. Read instructions completely
STEP 1.
before beginning.
NOTE:
Factory rocker bars or step boards must be removed before installing step bars.
Locate the driver side mount locations on vehicle. There are four sets of threaded holes along the side of the
STEP 2.
frame. From the front of the vehicle, the first and last set of holes are used.
Attach brackets to vehicle frame using two M8-1.25 x 30mm hex head bolts, 3/8" flat washers, and 3/8" lock
STEP 3.
washers per bracket.
Attach driver side step bar to cradles with the
STEP 4.
bolt and internal tooth lock washers as shown. Leave loose. Repeat for passenger side .
Make sure step bar and brackets are properly aligned with vehicle and tighten fasteners. Recommended torque
STEP 5.
values are 26 FT.LBS. for 3/8" fasteners and 23 FT.LBS. for 8mm fasteners
FINISH PROTECTION
Westin products have a high quality finish that must be cared for like any other exposed finish on the vehicle. Protect the finish with a non-abrasive automotive wax, (e.g.
Pure Carnauba) on a regular basis. The use of any soap, polish or wax that contains an abrasive is detrimental, as the compounds scratch the finish and open it to
corrosion.
INSTRUCTIONS-INSTRUCCIONES-CONSIGNES
APPLICATION: 2006-07 TOYOTA FJ CRUISER
APLICACIÓN:
APPLICATION: TOYOTA FJ CRUISER 2006-07
2
DRIVER SIDE
LADO DEL CONDUCTOR
COTE CONDUCTEUR
CONTENTS - CONTENIDO
CÔTÉ PASSAGER (1) ET CÔTÉ CONDUCTEUR (2)
SEE FIGURE 1 NOTE:
.
TOYOTA FJ CRUISER
PASSENGER SIDE
LADO DEL ACOMPAÑANTE
1
COTE PASSAGER
- CONTENU
(1) Y EL CONDUCTOR
Do not pinch or crush brake lines with brackets.
Westin
logo facing outward. Secure with two 3/8" button head
, MOD. 2006-07
TOOLS - HERRAMIENTA
13MM SOCKET
13MM WRENCH
7/32" HEX WRENCH
RATCHET
TORQUE WRENCH
(2) DADO DE 13MM
LLAVE DE TUERCAS DE 13MM
LLAVE HEXAGONALE DE 7/32"
MANERAL
LLAVE DE TORQUE
DOUILLE 13MM
CLE 13MM
CLE HEXAGONALE 7/32 PO
CLIQUET
CLE DE COUPLE
SEE FIGURE 1
SEE FIGURE 2
WO:
75-0725 REVISION A 8/9/07
3
- OUTILS
.
.