Westin Automotive Products 25-2510 Instrucciones

AUTOMOTIVE PRODUCTS, INC.
STEP BAR ASSEMBLIES
ENSAMBLES DE ESTRIBOS
MONTAGES DE MARCHE-PIEDS
25-2510
26-2510
25-2400
26-2400
ITEM QTY
1,2 2 STEP BAR, PASSENGER (1) AND DRIVER (2)
3,4 2 FRONT BRACKET, PASSENGER (3) AND DRIVER (4)
5,6 2 REAR BRACKET
7 1 FRONT MOUNT TAB ASSEMBLY, PASSENGER
8 1 FRONT MOUNT TAB ASSEMBLY, DRIVER
9 2 SPACER WASHER
10 6 1/2-13 X 1.75" HEX HEAD BOLT
11 8 1/2" FLAT WASHER
12 8 1/2" LOCK WASHER
13 4 1/2-13 HEX NUT
1,2 2 ESTRIBOS, ACOMPAÑANTE
3,4 2 SOPORTE DELANTERAS, ACOMPAÑANTE
5,6 2 SOPORTE TRASERAS, ACOMPAÑANTE
7 1 PLACAS DE PERNOS ACOMPAÑANTE
8 1 PLACAS DE PERNOS CONDUCTOR
9 2 ARANDELAS SEPARADORAS
10 6 PERNOS CON CABEZA HEXAGONAL DE 1/2-13 X 1,75"
11 8 ARANDELAS PLANAS DE 1/2"
12 8 ARANDELAS DE PRESIÓN DE 1/2"
13 4 TUERCA HEXAGONAL DE 1/2-13
1,2 2 MARCHE-PIEDS, PASSAGER
3,4 2 SUPPORTS AVANT, PASSAGER
5,6 2 SUPPORTS ARRIERE, PASSAGER
7 1 PLAQUES DE BOULON PASSAGER
8 1 PLAQUES DE BOULON
9 2 RONDELLE D'ESPACEMENT
10 6 BOULON A TETE PLATE 1/2-13 X 1,75 PO
11 8 RONDELLES PLATES 1/2 PO
12 8 RONDELLES A FREIN 1/2 PO
13 4 ÉCROUS HEXAGONAUX 1/2-13
STEP 1.
Remove the contents from box and check for damage. Verify all parts are present. Read instructions
completely before beginning.
STEP 2.
Locate the rectangular holes in frame towards the front of the vehicle. Insert front mount tab assemblies
into the hole from the inside of frame. Attach front brackets as shown. Hand tighten.
STEP 3.
Attach rear brackets as shown. Hand tighten.
hex head bolt and insert through frame from the inside of frame.
STEP 4.
Attach step bars as shown. Hand tighten.
STEP 5.
Make sure step bar and brackets are properly aligned with vehicle and tighten fasteners.
Recommended torque value is 64 Ft. Lbs. for 1/2" fasteners.
FINISH PROTECTION
Westin products have a high quality finish that must be cared for like any other exposed finish on the vehicle. Protect the finish with a non-abrasive automotive wax,
(e.g. Pure Carnauba) on a regular basis. The use of any soap, polish or wax that contains an abrasive is detrimental, as the compounds scratch the finish and
open it to corrosion.
INSTRUCTIONS-INSTRUCCIONES-CONSIGNES
APPLICATION: 1999-06 TOYOTA TUNDRA EXTENDED CAB
APPLICACIÓN: TOYOTA TUNDRA CON CABINA EXTENDIDA, MOD. 1999-06
APPLICATION: TOYOTA TUNDRA, CABINE RALLONGEE, 1999-06
25-2515
25-2405
1
CONTENTS - CONTENIDO
, PASSENGER (5) AND DRIVER (6)
(1)
(1)
CONDUCTEUR
2004-06 TOYOTA TUNDRA DOUBLE CAB
TOYOTA TUNDRA CON DOBLE CABINA, MOD. 2004-06
TOYOTA TUNDRA, CABINE DOUBLE, 2004-06
- CONTENU
Y CONDUCTOR (2)
(3) Y CONDUCTOR
(5) Y CONDUCTOR
ET CONDUCTEUR (2)
(3) ET CONDUCTEUR (4)
(5) ET CONDUCTEUR (6)
NOTE:
Place the spacer washer under the head of the
3
5
TOOLS - HERRAMIENTA
3/4" SOCKET
3/4" WRENCH
6" EXTENSION
RATCHET
TORQUE WRENCH
DADO DE 3/4"
LLAVE DE TUERCAS
(4)
EXTENSIÓN DE 6"
(6)
MANERAL
LLAVE DE TORQUE
DOUILLE 3/4 PO
CLE 3/4 PO
RALLONGE 6 PO
CLIQUET
CLE DE COUPLE
WO:
75-0574 REVISION A 10/24/07
4 7
6 8
- OUTILS
3/4"