Access The Product - Axis Communications YP3040 Manual Del Usuario

YP3040 Pan-Tilt Motor
1 Network camera
2
Network cable (Ethernet RJ-45 to camera)
3
PTZ control cable (RS485 to camera)
4
Power supply cable (24 V AC from mains adaptor)
5
Mains adaptor

Access the Product

When you install a compatible Axis network camera on the YP3040 Pan-Tilt Motor, the controls will
be available from the Live View page in the camera's web pages after enabling the PTZ functionality
in Setup tools. Follow these instructions to enable PTZ functionality in the camera:
1. Go to Setup > System Options > Ports & Devices > COM Port in the camera's web
pages, and set Usage to Pan Tilt.
2. Refer to the User Manual supplied with your product for instructions on how to configure
the PTZ settings.
8