RDM RUST-OLEUM Cabinet Transformations Manual Del Usuario página 10

J. To touch up remaining lightly coated areas wait about 10 minutes, and apply additional
coats to help conceal worn areas.
K. When back side is dry to touch (approximately 2 hrs) carefully turn over and complete
front in exact same manner.
L. Allow 4 hours before applying Protective Top Coat.
STEP #3 – APPLY PROTECTIVE TOP COAT
The Protective Top Coat is formulated with self cross-linking technology that provides
superior stain and scratch resistance.
Start with Cabinet Frames:
A. Wearing gloves and protective eyewear, thoroughly mix the Protective Top Coat with
the stir stick provided.
IMPORTANT:
coated areas that have started to dry.
B. Use a 2" angled or straight synthetic
paint brush to apply an even layer of
Protective Top Coat to the cabinet box
and frame. To ensure the best results,
use up-and-down brush strokes on the
cabinet sides and stiles. Use side-to-side
brush strokes on the horizontal rails.
End with light finishing strokes.
For best results use a
premium quality brush.
9
The Protective Top Coat dries quickly – do not brush over previously
S t i l e