RDM RUST-OLEUM Cabinet Transformations Manual Del Usuario página 11

C. Allow to dry completely for 2 hours and apply a second coat.
IMPORTANT:
apply 2nd coat. After an extended period of time the Protective Top Coat may build
up in brush bristles, periodically wipe with clean rag if this occurs.
Finish the Cabinet Doors and Drawers:
D. For the doors and drawer fronts apply the Protective Top Coat using the following
application method.
1. Apply Protective Top Coat to all four inside corners and sides
2. Coat center panel with long, smooth vertical strokes
3. Coat the top and bottom portions with long, horizontal strokes
4. Brush outer sides in a vertical motion
1
Use a dry paint brush to remove any excess Protective Top Coat
that may have pooled in corners and recesses.
E. Allow to dry completely for 2 hours and apply 2nd coat of Protective Top Coat
in same manner. Let 2nd coat dry for 2 hours.
F. Repeat on front side of doors.
Be sure to use clean 2" angled or straight synthetic paintbrush to
2 3 4
10