RDM RUST-OLEUM Cabinet Transformations Manual Del Usuario página 4

HOW TO MEASURE SQUARE FOOTAGE
Square Feet – Calculate your exact coverage needs
STEP 1: Measure the length of your top cabinets (A + B) in inches and multiply
by the height (E). Standard wall cabinet heights are: 12" – 18" and 30" – 42".
STEP 2: Measure the length of your bottom cabinets in inches (C + D) and multiply
times the height (F). Standard base cabinet height is: 34-1/2".
STEP 3: Add these two totals together and divide by 144 to determine the total
square feet you will need to cover.
Visit RustoleumTransformations.com to use our online calculator.
IMPORTANT:
measurements exceed the coverage on your kit package, you will need to purchase an
additional kit.
3
A
C
Properly measure your cabinetry prior to starting the project. If these
E
B
F
D