Publicidad
Idiomas disponibles
Idiomas disponibles
STEP 1
1. Insert 1 screw (F) through hole on magnet plate (H) and tighten to right side door (5).
2. Insert 4 screws (F) through holes on 2 hinges (G) and tighten to right side door (5).
3. Repeat above steps to assemble magnet plate (H) and 2 hinges (G) to left side
door (6).
STEP 2
1. Insert 4 wood dowels (C) into dowel holes on each end of lower cross bar (4).
2. Attach left side support board (2) to lower cross bar (4) by inserting wood dowels
into dowel holes on left side support board (2).
3. Attach right side support board (3) to lower cross bar (4) by inserting wood dowels
into dowel holes on right side support board (3).
Publicidad
