Publicidad
Idiomas disponibles
Idiomas disponibles
STEP 9
1. Insert 4 cam locks (B) into cam lock holes on left side panel (9) and right side panel
(10) and rotate clockwise to lock cam bolts (A) in place.
2. Insert 4 plastic holders (L) into holes on desired position for shelf (7).
3. Attach knob (J) to left side door (6) by inserting 1 machine screw (K) through hole
on left side door (6) and tighten to knob (J).
4. Repeat step 3 to assemble knob (J) to right side door (5).
STEP 10
1. Place drawing with hole positions on wall in desired position and drill 2 holes
through hole position on drawing.
2. Insert 2 plastic anchors (M) into holes on wall and attach cabinet in place by
inserting 2 screws (N) through holes on left side panel (9) and right side panel (10)
and tighten to wall.
3. Place adjustable shelf (7) on plastic holder (L).
Publicidad
