Publicidad
Idiomas disponibles
Idiomas disponibles
STEP 7
1. Screw 4 cam bolts (A) into pre-threaded holes on top board (1).
2. Attach magnet (D) to top board (1) by inserting 2 screws (E) through holes on
magnet (D) and tighten to top board (1).
STEP 8
1. Insert 6 wood dowels (C) into dowel holes on end of left side panel (9) and right side
panel (10).
2. Attach top board (1) to left side panel (9) and right side panel (10) by inserting wood
dowels into dowel holes on top board (1) and inserting cam bolts (A) into cam bolt
holes on left side panel (9) and right side panel (10).
Publicidad
