Steren CCTV-950 Manual De Instrucciones página 22

Then, you can set next parameters:
Channel 1 – 4 sensitivity
As user you can confi gure the motion sensitivity for each
channel. Press Sel / Edit to modify the parameter.
Channel 1 – 4 area set
This option allows you to select the active area, which
it helps to activate the alarm. The image will be divided
in 144 blocks (12x12), if the area is active, you will see a
transparent block, if the area is not active, you will see
a shadow in the block. Use Up ( Down ( Forward /
Backward to select a block and set it up, pressing Sel /
Edit button.
Restore factory default
This option will restart the recorder default options. Re
member, all changes made by the user will be erased
after this process.
If you established a password and you forget it, press
Pause button 10 times, this process will restart the
system.
If you are in recording mode, power the recorder off, and
remove the HD. Then, power on the recorder and press
Pause button 10 times.
NTSC / PAL OUTPUT SELECT
Power off the recorder and unplug the AC power adapter. Then,
remove the case and locates the jumper 10, remove it and select
PAL or NTSC according your needs.
ENGLISH-22