Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
5.- Replace the cover on the equipment making sure to replace
all the screws removed earlier.
INSTALLATION
1.- Locates BNC input jacks.
2.- Plug the camera 1 into the Channel 1 connector, repeat the
process for next 3 cameras.
3.- Plug a monitor in one of the VIDEO OUTPUT jacks.
4.- Plug an AC power adapter into the DC power connector, then
connect it into an AC outlet.
Camera 3
Camera 4
Monitor
Camera 1
Camera 2
Motion Sensor
Alarm
In case you need to install a PIR sensor or alarm, plug them
In case you need to install a PIR sensor or alarm, plug them
into Sensor / Alarm inputs.
into Sensor / Alarm inputs.
Make sure the HD jumpers are in Master mode.
Make sure the HD jumpers are in Master mode.
ENGLISH-8
Publicidad
Tabla de contenido
