Shutdown; Led And Alarm Indicators - LEGRAND KEOR SP 600 Manual De Instrucciones

4.4

Shutdown

1. Press and hold the ON/OFF button until the led bar turns off.
2. The UPS stops powering the outlets.
3. Unplug the UPS from the mains power supply socket.
4.5 LED bar and Alarm Indicators
LED BAR
Green Yellow
4 LEDs
-
steady
4 LEDs
-
steady
3 LEDs
-
steady
2 LEDs
-
steady
1 LED
-
steady
1 LED
-
blinking
4 LEDs
-
blinking
-
4 LEDs
-
rolling
4 LEDs
-
steady
- -
ALARM
Red
- Off
1 beep every
-
30 seconds
2 beeps every
-
30 seconds
3 beeps every
-
15 seconds
4 beeps every
-
15 seconds
- Intermittent
- Intermittent
4 LEDs Continuously
steady sounding
- Off
1 beep every
-
3 seconds
4 LEDs Continuously
steady sounding
UPS STATUS
The UPS is operating in normal mode
UPS operating in battery mode
with battery status 100%-75%
UPS operating in battery mode
with battery status 75%-50%
UPS operating in battery mode
with battery status 50%-25%
UPS operating in battery mode
with battery status 25%-10%
UPS operating in battery mode
with battery status <10%
Overload in normal mode
UPS shutdown due
to prolonged overload
Battery service
Overtemperature
UPS fault (other than overload)
KEOR SP
33