Installation for the WFPT200, WFPT100 and WFPT075
Insert Cartridges
Insert the cartridge into the reservoir by lining up the
notch in the cartridge with the rib in the cartridge
reservoir. Press each cartridge in firmly to ensure a
tight seal. Fill the reservoir with cold tap water. It is
normal for carbon particles to appear in the first few
fillings. Use the first two pitchers of filtered water to
water plants, or simply discard.
Set Filter Life Calender or Mark Calendar
For pitchers with a built-in Filter Life Calendar set the
reminder on the reservoir lid for two months from now.
Remember to change your DuPont cartridge every two
months for refreshing great tasting water. Otherwise
please mark your kitchen calendar two months from now.
Fill Reservoir
Fill the top reservoir with cold tap water and allow it
to drain into the pitcher. Enjoy the refreshing taste of
filtered water.
Water Temp < 85F/29C
NOTE: Before refilling your pitcher, press firmly on the cartridge in the
Do Not Filter Hot Water
reservoir to assure a good seal.
V4.5
2