G4 WORLD RECORDER
CHARGE NI-MH BATTERIES BY CONNECTING TO
THE COMPUTER
in the LCD.
2. Turn off the unit and press
and the charging starts.
3. When the battery is charged,
in the LCD. If you want to stop charging, press
NOTE: When charging, you can use the radio normally.
SETTING UP THE AM TUNING RATE AND CLOCK
SYSTEM
The G4 can be set up for a 9KHz or 10KHz MW (AM) tuning rate or
for use in North America (U.S. or Canada) with 10KHz tuning rate
are needed if you're in North America.
To change these settings, use the instructions below.
To Change the Tuning Rate and Clock System
1. With the radio turned off remove one battery and disconnect the
AC adapter. Wait 60 seconds until the display goes completely
2. Reinstall the battery or connect the AC adapter. 'SET' appears in
the display for about 10 seconds. While it's in the display press
the 'ENTER' button. 9 10 appears in the display. Press 1 to select
9KHz, 2 to select 10KHz.
3. 12 24 appears in the display. Press 1 to select 12 hour system, 2 to
select 24 hour system.
OWNER'S MANUAL
displays
. The battery symbol
is flowing
stops flowing and
displays
once.
7