Phase II FabricShade El Manual Del Propietario página 6

Step 6. Installing Hold-Down Brackets
Hold down brackets are provided for optional use. These brackets
should be used only if the shade is to be in a permanently lowered
position. With the shade fully lowered, make pencil marks at the
outside ends of the bottom rail. Brackets should be lined up to the
pencil marks and screwed into place using the 3/8" screws. Insert
the pins protruding from the brackets into the holes on both ends of
the bottom rail (see illustration).
CLEANING
The vinyl head rail and bottom rail can be wiped clean with a
damp sponge. To clean the shade fabric, use a feather duster
or vacuum lightly using the soft brush attachment.
6