Backyard Storage Solutions Marco Serie Manual Del Usuario página 4

4
3
2
5
This building has been designed using our patented EZ Frame construction method.
EZ Frame is a unique construction method which has been engineered to use fewer
framing members. This reduces assembly time and cost by as much as 30% compared to
conventional construction methods.
All of our buildings have been engineered to withstand demanding wind and snow loads.
If you live in an area with extreme wind/snow load requirement, contact
us and we can assist with engineering to meet your local codes.
1 1. Sub-assembled front walls with pre-hung doors.
2. 2x3 wall studs have been engineered to support roof load and to meet demanding wind loads. 2
3
3. Sidewall top plates tie wall studs together and provide nailing support for top edge of siding.
4
4. Rafters line up over wall studs to effectively transfer roof load to the floor and eliminate need for double top plate.
Oversized wood gussets at peak provide a strong connection for rafter halves.
5. Treated siding overhangs the floor to keep the elements out and eliminate the need for a bottom plate.
5
6
6. Collar ties and storage loft tie sidewalls together to prevent spreading under heavy roof loads.
7. Corner studs & rafters are positioned to the outside of the siding where they serve the dual purpose of framing and trim. 7
8
8. The EZ Frame design transfers the roof load to the side walls allowing for reduced framing at the front and back wall.
9
9. Includes treated floor frame and sturdy Oriented Strand Board (OSB) floor deck.
BUILDING ANATOMY
8
9
6
4
EZ Frame patent no. 5,666,766
2
7
1