Steren GPS-400 Manual De Instrucciones página 6

Left Side
1
1.- SD card slot.
2.- Earphone port.
3.- Restart button.
2
Allows you to restart the device
in case the systems fails.
3
2.- Mini USB port.
4
Right side
1.- Volume control.
2.- Power switch on
4
Place this switch in ON position
to enable the stand-by mode,
you must do it to use the frontal
1
power button.
2
3.- Input voltage.
3
4.- External antenna port
Allows you to connect an external
port to receive strongest satellite
signals
ENGLISH-16
Up side
1.- Menu.
Use to enter main menu
2.- Power button.
Press to power on / off the device.
The device will be in stand-by mode only if you place the power switch
in ON position.
2
1
ENGLISH-17
PLACING THE EQUIPMENT
Your new GPS device comes with all the equipment necessary to place
it in your car without the need of any perforations or structural changes
in your car.
1.- Insert first bracket of the screen at the base of assembly as shown in
figure.
ENGLISH-18