10.3 Deleting a Recording
If the recorder is in Time mode, press MODE to enter
Standby mode.
1. Press FILE/REPEAT to select a File Folder (A, B, C, D).
The Recording Number indicator in the upper-right corner
will display the total number of recordings in the selected
File Folder.
2. Press
or
to select a Recording Number. The Time indicator at the bottom will display the length of the
selected recording.
3. To erase the selected recording:
• Press PAUSE/ERASE. The recording will start playing, and the display will flash "DEL".
• Press PAUSE/ERASE again to delete the recording, or press any other key to cancel.
4. To erase all recordings:
• Press and hold PAUSE/ERASE for 5 seconds. The display will flash "DELALL".
• Press
or
to select Yes or No. Press
to delete all recordings in the selected folder or press anyother
key to cancel.
Once a recording has been deleted it cannot be recovered.
When the recorder or micro SD card is full, the LCD will display "FULL". Delete or move some recordings to your
PC in order to record again.
16