Using Micro Sd Card - Steren REC-845 Manual De Instrucciones

13. USING MICRO SD CARD

You can expand the capacity of the recorder by installing a micro SD flash
memory card.
1. Insert a micro SD card in to the micro SD slot located on the right side of the
recorder.
2. If the recorder is in Time mode, press MODE to enter Standby mode.
3. Press and hold MODE to enter Setup mode (the LCD should read "SET").
4. Press " - " key for three times. The LCD will display "SET OFF" and the micro SD Card indicator [
on screen.
5. Press or to change the setting between "OFF" and "ON".
- Use the "OFF" setting to use the recorder's internal memory.
- Use the "ON" setting to use the micro SD card flash memory.
6. When all settings have been completed, press MODE to return to Standby mode.
When the micro SD card is in use, the device will automatically record and playback from the micro
SD card.
The micro SD setting must be set to "ON" each time a micro SD card is installed. If no micro SD card is
installed, the "ON" option will not be available.
] will appear
21