SET UP
CHARGING YOUR EARBUDS
To charge your earbuds, place them into the portable
case. The red LEDs show that they are charging. If
the red LEDs do not appear when placed in the case,
adjust the earbuds to make sure they are in line with the
charging contacts. When fully charged, the LEDs will
shut off.
CHARGING YOUR PORTABLE CASE
Plug the small end of the micro USB cable into the micro
USB port, located on the right side of the case, the LED
on the case will show solid red when charging. When the
portable case is fully charged, the LED will shut off.
EN — 4