Publicidad
Step 10
Fasten two ANGLE BRACKETS (27G) to the STOP MOLDING (G).
å
Use two BLACK 9/16" LARGE HEAD SCREWS (1S).
Fasten the VALANCE (J) to the STOP MOLDING (G). Use two
å
BLACK 9/16" LARGE HEAD SCREWS (1S).
NOTE: There are no pre-drilled holes in the VALANCE. The
å
SCREWS will tighten into the groove.
Page 14
G
404962
BLACK 9/16" LARGE HEAD SCREW
J
Groove
1S
(4 used in this step)
27G
www.sauder.com/services
Publicidad
