Transmitting Data - JB Systems CMX 24 Instrucciones Para El Uso

B. Highest Speed (10 min.)
1) Press the Record key and hold it.
2) Press 3 times on the 10th Flash key, release Record.
3) The 10 minutes Led lights up.
16. MIDI IN
1) Press and hold the Record key.
2) Press 3 times on the 1st Flash key, release Record. When
CHI appears on the display, you can select the MIDI IN
channel with Flash keys 1 to 16.
3) After selecting the Flash key the Led will light up.
4) Press Record and Exit to leave the MIDI IN settting.
17. MIDI OUT
1) Press and hold the Record key.
2) Press 3 times on the 2nd Flash key, release Record. When
CHO appears on the display, you can select the MIDI OUT
channel with Flash keys 1 to 16.
3) After selecting the Flash key the Led will light up.
4) Press Record and Exit to leave the MIDI OUT settting.
18. RECEIVING DATA
1) Press and hold the Record key.
2) Press 3 times on the 3rd Flash key, release Record. When
IN appears on the display it is ready to receive data.
3) You can't perform any other actions while the data is
loading. It will leave this mode automatically when all data
is loaded or when a failure occurs. Turning the apparatus
on or off will interrupt the loading of data.

19. TRANSMITTING DATA

1) Press and hold the Record key.
2) Press 3 times on the 4th Flash key, release Record. When
OUT appears on the display it is ready to transmit data.
3) You can't perform any other actions while the data is
transmitting. It will leave this mode automatically when all
data is transmitted or when a failure occurs. Turning the
apparatus on or off will interrupt the transmitting of data.
11 CMX 24