Hardware Installation - Steren COM-425 Manual De Instrucciones

HARDWARE INSTALLATION

You must install the PCI card inside of the computer. Make sure
you have the enough knowledge confi guring and installing
computer components, otherwise refers a qualifi ed personnel.
1.- Unplug the power cord from your computer and any other connected
peripheral devices. Follow the precautions for static electricity
discharge.
2. Remove the computer's cover.
3. Select an available PCI slot for the new board.
4. Remove the selected slot bracket by unscrewing the holding screw,
slide it out and place the PCI card, carefully align the board's bus
connector with the selected expansion slot on the motherboard. Push
the board down fi rmly, but gently, until it is well seated.
Slot bracket
5. Place the computer's cover and plug all your peripheral devices.
ENGLISH-05