Manhattan 176576 Manual Del Usuario página 2

Serial PC Card • User manual
Thank you for purchasing the MANHATTAN
go to www.manhattan-products.com.
With your computer and any other connected peripheral devices turned off, insert the PC
card into the PC card slot of your computer, then turn the computer on.
Driver Installation: Windows 2000
1. When the wizard's Found New Hardware screen displays, click "Next. "
2. Select "Search for a suitable driver for my device (recommended)"; click "Next. "
3. Check "Specify a location"; uncheck the other boxes; click "Next. "
4. Insert the driver CD; enter "D:\Cardbus\98XX\2000"*; click "OK. "
5. Click "Next"; then "Finish. "
6. Restart to complete the installation.
Driver Installation: Windows XP / Server 2003
1. When the wizard's Found New Hardware screen displays, select "Install from a list or
specific location (Advanced)"; click "Next. "
2. Insert the driver CD; check "Include this location in the search"; uncheck the other box;
enter "D:\Cardbus\98XX\Win7_Vista_XP32Bit" for 32-bit Windows XP/Server 2003* or
"D:\Cardbus\98XX\Win7_Vista_XP64Bit" for 64-bit Windows XP/Server 2003*; click "OK. "
3. If the Hardware Installation window pops up, click "Continue Anyway"; click "Finish. "
4. Repeat steps 1-3 two more times.
5. Restart to complete the installation.
Driver Installation: Windows Vista / 7
1. When the wizard's Found New Hardware screen displays, select "Locate and install driver
software (recommended). "
2. Click on "I don't have the disk. Show me other options. "
3. Select the option "Browse my computer for driver software (advanced). "
4. Insert the driver CD; check "Include subfolders"; enter "D:\Cardbus\98XX\Win7_Vista_XP
32Bit" for 32-bit Windows Vista/7* or "D:\Cardbus\98XX\Win7_Vista_XP64Bit" for 64-bit
Windows Vista/7 *; click "Next. "
5. If the system prompts you that the drivers are not signed, select the option "Install this
driver software anyway. "
6. Click "Close" to complete the driver installation.
Verifying the Driver Installation
1. Right-click "My Computer"; click "Manage"; click "Device Manager. "
2. Click on "+" in front of "Ports (COM & LPT)"; "MosChip PCI Serial Port ..." should be displayed.
3. Double-click "Multifunction adapters"; "MosChip PCI Multi-I/O Controller" should be
displayed.
Changing the COM Port Address
Some serial devices need a specific COM port in order to work. If your serial devices work
properly, do not change these settings.
1. In the Device Manager window, double-click "Ports (COM & LPT)"; then double-click the
"MosChip PCI Serial Port" you want to change.
2. On the Settings tab, click "Advanced. "
3. Click the down arrow next to the "COM Port Number" box; select a COM port that is not in
use; click "OK"; then close the Device Manager to save the changes.
* Change "D:" as needed to match your CD-ROM drive designation.
2
English
Serial PC Card, Model 176576. For specifications,
®
English