Health And Safety / Technical Data - Rohr MIG-200MI Operación Manual

MIG-200MI / MIG-250MI
Health and Safety
Environment
1. The machine can perform in environments where conditions are dry with a maximum humidity level
of 90% and an ambient temperature between -10 to +40 degrees centigrade.
2. Avoid welding in direct sunshine or a wet/damp environment. If the machine comes into contact with
water, do not use the machine until it has been fully inspected by a qualified professional.
3. Do not use the machine in an environment where the air is polluted with conductive dust.
Technical Data
Power Voltage (V)
Frequency (HZ)
Rated Input Current (A)
Output Current MIG (A)
Output Current MMA (A)
Output Voltage (V)
Duty Cycle (%)
Power Factor
Efficiency (%)
Wire Machine
Wire Speed (M/Min)
Post Puff (S)
Wire Spool Diameter (mm)
Wire Diameter (mm)
Applied Welding Rod (mm)
Housing Shielding Grade
Insulation Grade
Suitable Wire Thickness (mm)
MIG-200MI
1 phase AC230V±15%
50/60
28
50-200
20-200
16.5-24
60
0.93
85
Compact
2.5-13
1
150
0.6-1
1.6-4
IP21
F
0.8 and above
© ROHR
English
MIG-250MI
1 phase AC230V±15%
50/60
36.4
50-250
20-250
16.5-26.5
60
0.93
85
Compact
2.5-13
1
150
0.6-1
1.6-5
IP21
F
0.8 and above
7