Carton Contents - SNOWJOE SUNJOE TJ605E-ELT Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Unpacking

Carton Contents

• Electric tiller + cultivator housing
• Upper handle frame
• Middle handle frame
• Cable clips (2)
• Handle knobs and bolts (4)
• Manual with registration card
1. Carefully remove the electric tiller + cultivator and check
to see that all of the above items are supplied.
2. Inspect the product carefully to make sure no breakage or
damage occurred during shipping. If you find damaged or
missing parts, DO NOT return the unit to the store. Please
call the Snow Joe
+ Sun Joe
®
1-866-SNOWJOE (1-866-766-9563).
NOTE: Do not discard the shipping carton and packaging
material until you are ready to use the electric tiller +
cultivator. The packaging is made of recyclable materials.
Properly dispose of these materials in accordance with
local regulations or save the packaging for long-term
product storage.
IMPORTANT! The equipment and packaging material are not
toys. Do not let children play with plastic bags, foils, or small
parts. These items can be swallowed and pose a suffocation
risk!
Assembly
m
WARNING!
Do not connect to the power supply
until assembly is complete. Failure to comply could result in
accidental starting and serious personal injury.
m
WARNING!
Before performing any maintenance, make
sure the tool is unplugged from the power supply. Failure to
heed this warning could result in serious personal injury.
m
WARNING!
To prevent serious personal injury, make
sure the switch is not squeezed, the unit is unplugged, and
the tines have come to a complete stop before inspecting,
cleaning, or servicing the unit.
m
WARNING!
The product must be fully assembled
before operation. Do not use a product that is only partially
assembled or assembled with damaged parts.
Follow the assembly instructions step-by-step and use the
pictures provided as a visual guide to easily assemble the
product.
customer service center at
®
Connecting the Handles
NOTE: Small parts can easily get lost during assembly or when
making adjustments to the machine. To avoid this, secure all
small parts that are removed from the machine and keep them
accessible.
1. Attach one cable clip on the middle handle frame (Fig. 1).
Fig. 1
Cable clip
Middle handle
frame
2. Remove the bolts from the knobs and keep them handy.
3. Secure the middle handle frame to the lower handle frame
using the first set of knobs and bolts. Tighten the knobs
on each side to ensure a secure fit (Fig. 2).
Fig. 2
Middle handle frame
Knob + bolt
4. Connect the upper handle frame to the middle handle
frame using the second set of knobs and bolts. Tighten
the knobs on each side to ensure a secure fit (Fig. 3).
7
Lower
handle
frame

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Sunjoe tj603e

Tabla de contenido