AKASO V50 Pro Manual De Usuario página 8

Ocultar thumbs Ver también para V50 Pro:
Tabla de contenido

Publicidad

7. Slow Motion Movie: On/Off
Default setting is off.
Slow motion is an effect in film-making whereby time appears to be slowed down.
Note: If you want to select Slow Motion Movie, please turn off Image Stabilization
first, then choose 720P 120fps under Video Resolution.
8. Fast Motion Movie: Off/2x/4x/6x/10x/15x
Default setting is off.
Action that appears to move faster than normal on the screen, accomplished by
filming the action at less than normal speed in the camera and then projecting it at
normal speed.
9. Wind Noise Reduction: On/Off
Default setting is off.
Turn on Wind Noise Reduction, it can lower the noise to an acceptable level.
10. Scene Mode: Manual/Water/Riding/Winter/Diving/Night
Default setting is Manual.
11. Date Stamp: Off/Date/Date&Time
Default setting is Date&Time.
If you select Date&Time, this camera adds date stamp to the videos you take.
12. Auto Low Light: On/Off
Default setting is Off.
Auto Low Light mode will automatically adjust settings according to lighting
conditions to achieve the best low light performance. Even if you move back and
forth between bright and dark environments, you do not need to manually adjust
the camera settings.
Photo Setting
1. Resolution: 20MP/16MP/14MP/10MP/8MP/5MP/2MP
Default setting is 14MP.
10
2. Time Lapse Interval: Off/3 Sec/5 Sec/10 Sec/30 Sec/1 Min
Default setting is off.
Time Lapse Photo captures a series of photos at specified intervals. Use this mode
to capture photos of any activity, then choose the best ones later.
3. Time Lapse Duration: Unlimited/5 Min/10 Min/15 Min/20 Min/30 Min/60 Min
Default setting is Unlimited.
Note: If you want to set Time Lapse Duration, please turn on Time Lapse Interval first.
4. Photo Burst: Off, 3 shots/1s, 7 shots/2s, 15 shots/4s, 30 shots/8s
Default setting is off.
Burst captures up to 30 photos in 8 seconds, so it is perfect for capturing fast-
moving activities.
5. Delay Timer: Off/Delay 2s/Delay 10s
Default setting is off.
A Delay timer gives a delay between pressing the shutter release and the shutter's
firing. It is most commonly used to let photographers to take a photo of themselves
(often with family).
6. Date Stamp: Off/Date/Date&Time
Default setting is Date&Time.
If you select Date&Time, this camera adds date stamp to the photos you take.
7. Scene Mode: Manual/Outdoor/Indoor/Portrait/Landscape/Night
Default setting is Manual.
8. Picture Quality: S-Fine/Fine/Normal
Default setting is S-Fine.
9. Long Exposure: Off/1 Second/2 Second/5 Second/8 Second/30 Second/60 Second
Default setting is off.
Long exposures are easiest to accomplish in low-light conditions, but can be done in
brighter light using neutral density filters or specially designed cameras.
11

Publicidad

Tabla de contenido
loading

Tabla de contenido