Configuring The C150Brs4; Logging In - Conceptronic C150BRS4 Manual De Instrucciones

This chapter describes how to configure the C150BRS4 using the built-in setup wizard. After completing
the steps in this chapter your router has been set up for its primary functions.

5.1 Logging in

For configuration of the C150BRS4 a web based interface is being used. This means you are able to
configure the C150BRS4 on any computer with a web browser which is connected to the C150BRS4.
Note: It is strongly advised not to use a wireless connection while configuring the C150BRS4, since its
connection could be lost when adjusting certain settings. Therefore it is highly recommended to
use a computer that is connected to the C150BRS4 with a network cable.
To log in to the C150BRS4, follow these steps:
A. Start your web browser (like: Internet Explorer, Firefox, Safari or Chrome).
B. Enter the IP address of the router in the address bar of your web browser.
By default
A pop-up window will be shown asking you for the user name and password.
C. Enter the user name and password and click on 'OK' to enter the web based configuration.
Default user name
Default password

5. Configuring the C150BRS4

: http://192.168.0.1/
: admin
: admin
C
ENGLISH
33