Velux KLI 110 Manual Del Usuario página 40

max 5 sec
+
+
b a
engLIsh: Additional one-way keypad KLI 110 used with a two-
a
way control unit
b
registration of an additional one-way keypad KLI 110 for opera-
1
tion of one or more products that are connected to the same control
system and are already operable via a two-way control unit .
2
The product(s) to be operated is/are prepared for registration as de-
scribed in the directions for use supplied with VELUX two-way remote
control KLR 100 , see section Copying products to other types of
b
control units. For other types of two-way control units, please refer to
the instructions provided with the product in question. The registration
must be completed within 10 minutes.
Remove the front section of the additional keypad KLI 110 , insert the
a
batteries and press the RESET button briefly − max 5 seconds. Replace
the front section.
The relevant product(s) can now be operated via the additional keypad .
a
When registering more than one product, you can register one product
at a time in order not to exceed the time limit of 10 minutes.
40 VELUX