Telstar TVS600010MD Manual De Instrucciones página 14

VACUUM CLEANER
TVS600010MD
Risk of injury
Never hold the crevice nozzle close to the body or it may stick to the skin. If the nozzle does get
stuck, set the On/Off switch to immediately.
Caution when in use
After rinsing, the dust filter and motor protection filter must be completely dry before being reinsert-
ed.
Only use the appliance again once it has been fully reassembled and both filters (dust filter
and motor protection filter) have been reinserted.
For your own safety, check the appliance for damage before use. If defective, the appliance should
not be used until it has been repaired by a qualified technician. If the power cord is damaged, it
should be replaced by a qualified technician to avoid risk.
Once connected, the power cord should be placed so that no one can trip over them.
Do not insert anything into the openings / nozzles of the appliance and make sure that they do not
become blocked.
Before changing nozzles, always switch the vacuum cleaner off beforehand.
Never leave the appliance unattended when switched on.
When interrupting work and after use switch the appliance off and unplug.
Only use genuine manufacturer accessories.
Caution with malfunctions
Before checking the appliance for blockages or dealing with them, switch the vacuum cleaner off
and remove the plug.
Do not insert objects in the appliance: they might touch live parts.
If liquids or foreign bodies get inside the appliance, unplug immediately. Have the appliance
checked before reusing.
Damage to property / appliance
Never place heavy objects on the appliance.
Protect the appliance from heat, naked flame, direct sunlight and shocks. Do not drop the appliance.
14