Telstar TVS600010MD Manual De Instrucciones página 18

1.
Fit or remove the rod handle depending on whether you want to use the vacuum cleaner
as a handheld or a floor appliance.
2.
You can use the vacuum cleaner either without a nozzle or fit one of the nozzles to the
suction opening.
3. To quickly unwind the cable from the floor vacuum cleaner, twist down the cord holder on
the top handle
4. Insert the power plug in a wall outlet.
5. Set the On/Off switch to .
6. Move the suction opening or nozzle over the surface to be cleaned.
7. After finishing vacuuming, set the On/Off switch to and unplug.
8. After use, always empty the dust collector and clean the dust filter.
CLEANING
CAUTION
Remove the power plug before cleaning and / or putting away.
Do not use caustic or abrasive products to clean the housing or you may damage the surface.
Never immerse the appliance in water.
Emptying dust collector and cleaning dust filter.
1. Hold down the unlocking button for the dust collector and carefully remove.
2. Hold the dust collector over a dustbin, carefully remove the dust filter and empty the dust
collector.
3. Bang the dust filter gently.
18
VACUUM CLEANER
TVS600010MD