Telstar TVS600010MD Manual De Instrucciones página 16

ASSEMBLY
Conversion from handheld to floor vacuum cleaner
Remove all parts from the packaging and place carefully on a flat area. If necessary, put protective sheeting
underneath to avoid harm to easilydamaged surfaces. Carefully remove all packing
materials. Compare the contents with the list of parts..
Using as a handheld vacuum cleaner
The 2 in 1 Vacuum Cleaner is ready for use as a handheld appliance as soon as it has been
unpacked.
Using as a floor vacuum cleaner
1. Open the little flap on the handle of the handheld vacuum cleaner.
2. Insert the rod handle in the opening in the handle and push in as far as it will go.
3. Press the flap against the adapter so that it snaps into place.
Removing rod handle
4. Open the flap.
5. Pull out the rod handle.
6. Close the flap on the handle again
Accessories
Fitting and removing nozzles
CAUTION
• Before changing nozzles, always s witch the vacuum cleaner off first.
• When fitting nozzles, insert in the suction opening.
• To remove nozzles, pull out of the suction opening.
16
VACUUM CLEANER
TVS600010MD