General Information; Operating Mode - NATURE & DECOUVERTES 15210110 Manual Del Usuario

Difusor por nebulización amarante
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

GENERAL INFORMATION

2
1
• Size: (L)115mm*(H)235mm*(W)75mm
• Input: 100-240V 50/60Hz; Output: DC 5V-1A.
• Including 4 parts: wooden base, glass spray bottles, atomization nozzle and adaptor.
• Adjust the outflow of essential oil by rotating the switch knob.
• Replenish essential oil when the outflow becomes smaller.
• Feature: Relieve Pressure, Aroma therapy, Purify the air around, Neutralize static, Reduce
infection of skin.
• LED Colors of 7 rainbow lighting can be nightlight.
• Intermittence Diffusion in cyclic run 5 min then 3 min off, for best nebulizing performance.
• 3 hours timing auto-off
1
Adaptator
2
Glass spray bottles
3
Built-in spray head
4
Switch knob
5
Wooden base
3
4
5
8

OPERATING MODE

1
2
4
5
1
Pivoting insert the glass bottle downward
into the wooden base.
Add appropriate drops of essential oil into
2
bottle within Max level.
3
Plug the DC power adapter to the inlet at
the bottom of the diffuser.
ATTENTION
• Fragile products, please handle gently. Not
allow children as toys to play.
• Use 100% pure natural essential oil only.
• Use medical alcohol to clean the glassware
at least one time every week to avoid nozzle
clogging.
MAINTENANCE
1. Take off the lid and vertical upward rotation
remove the glass bottle from the wooden
base.
2. Pour out the remaining essential oil from
the glass bottle and wash the inside with
the alcohol.
3. Add about 3-5ml alcohol and run the
device for 15 minutes.
3
6
4
Cover the spray nozzle and adjust the
position of the spray nozzle to ensure its
sealed well.
5
Plug into power supply to get power on.
6
Operate the spin button to choose the
working mode.
• When cleaning glassware, not allow cotton
swabs or brushes are used to scrub the
glass nozzle.
• A slight difference in mist amount produced
by different units in expected.
• Factors affecting the mist amount: water,
humidity, temperature, and air flow.
4. Pour out the medical alcohol and run the
product again until remaining alcohol
evaporated.
5. Clean the bottle thoroughly by medical
alcohol before switching to different
essential oil.
6. Water washing the wood base is prohibited,
use a wet towel to clean.
9

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido