Motor Protection Filter - domoova DTV20 Manual De Instrucciones

EN
Maintenance

Motor protection filter

Remove the motor unit and shake it outside to remove any built up
dust particles, then rinse it with clean water (Figure 1).
NOTE: Wait 24 h before you put the motor filter back to ensure that it is completely
dry before reuse.
HEPA filter
Remove the air outlet grill by pressing the release button and remove
the HEPA filter (Figure 1). As maintenance, you can shake it outside
to remove any small dust particles that could accumulate.
NOTES:
• Pull firmly on the HEPA filter tabs to unclip the filter.
• The HEPA filter cannot be cleaned, otherwise it would become damaged. If the
HEPA filter is damaged, you are recommended to replace it to ensure that your
vacuum's filter performance is maintained.
Figure 1
Figure 1
12