Brushes; Sand Screens; Maintenance & Troubleshooting; Care Of Your Oreck Floor Machine - Oreck XL ORBITER RORB400 Serie Manual Del Usuario

Blue Scrub Pad
(medium aggressive)
• Used for scrubbing.
• Cleans tile and concrete.
Brown Strip Pad
(most aggressive)
• Strips linoleum, vinyl, laminate and tile floors.
• Cleans and scrubs tile and grout.
• Can be used on commercial vinyl.
• Use on smooth concrete.
• Use with Sand Screens.
• Scrubs and cleans wood decks.
Beige Marble Pad
(marble only)
• For restoring and cleaning marble floors.
To use a floor pad, see "Attaching Accessories" on page 4
and "Removing Accessories" on page 5.

Brushes

Brushes are designed to get into
grooves and recesses on non-flat
surfaces. Brushes lift and remove
ground-in dirt and grime.
Brushes are coded depending on how
aggressive they are with the black
carpet brush being the least
aggressive, followed by the tan polish brush (union mix)
and the orange scrub brush the most aggressive.
Black Carpet Brush
(least aggressive)
• Use with Oreck Dry Shampoo.
• Safe, soft action needed for carpet cleaning.
• Use on textured linoleum.
• Use for cleaning delicate or glazed ceramic or
porcelain tile.
Tan Polish Brush (Union Mix)
(medium aggressive)
• Use to polish wood floors.
• Will "blend" in excess floor wax, maintain an
even coat of wax and eliminate wax build-up.
• Use for getting inside cracks of a wood floor.
• Use to polish waxed wood floors.
• Use for marble, stone, and delicate tile floors
Orange Scrub Brush
(most aggressive)
• Used to clean ceramic tile or concrete and many tough
stains.
To use a brush, see "Attaching Accessories" on page 4
and "Removing Accessories" on page 5.
E N G L I
437057

Sand Screens

Sand screens offer the very best in
floor sanding. For all sand screens,
place the black drive pad holder on
437049
Orbiter
place the sand screen under any floor
pad on floor and center Orbiter
Floor Machine onto the pad.
60 grit
80 grit
100 grit
For Questions or Information about Oreck's Line of
437058
Cleaning Products, Please Call or Visit Your Local Oreck
Dealer.
RESIDENTIAL
USA: 1-800-989-3535
Canada: 1-888-676-7325
www.oreck.com
COMMERCIAL
Commercial: 1-800-242-1378
www.oreckcommercial.com
Care of Your Oreck
Multi-Floor Machine
237049
This is a precision machine. Dropping, unreasonable
bumping or rough handling may result in damage to the
balanced counter-weight system. Wrap your cord loosely
around the two hooks on the handle. Remove brushes after
use. The bristles may be damaged due to the weight of the
machine. Store your machine in the upright position. After
237048
each use, remove wax or cleaning solutions from the unit.
After sanding, blow sawdust off motor. Clean housing and
bumper with damp cloth after each use. A little care will
keep your Orbiter

User Maintenance

The Orbiter
sealed. All other servicing should be performed by an
237047
authorized service center. There are no user serviceable
parts inside.
11
S H
Multi-Floor Machine. Then
®
® Multi-
Maintenance &
Troubleshooting
®
® looking like new.
motor bearings are factory lubricated and
®
SS12060
SS12080
SS12100