DUCASSE INDUSTRIAL TWIN TL Instructivo De Montaje página 23

Stoppers Set-up
- Keep mounted doors in its closed position to fix the stoppers. To do this, you need to
move them until they fit with the carriers and then, fix them in that position.
- The lock stopper E is set on door 1 (P1) with a screwdriver and the pulley stopper D
must be fixed on the door 2 (P2) using Segmenta key.
P2
- Then, to fix the remaining stoppers it is necessary to bring the doors to a open position,
move the stoppers until fitting them with the carriers and fix them in that position.
- To achieve an optimal termination it is necessary to
consider the minimum measures of overlapping (T).
P1
T
* To make sure the pieces are left in the right
position, it is necessary that the pulley is free
towards the center of the rail.
T
PF
* To make sure the pieces are left in
the right position, it is necessary to
fit the stoppers on the carrier.
PF
P1
P2
T
T = 50 min
Step 7
23