DUCASSE INDUSTRIAL TWIN TL Instructivo De Montaje página 24

Step 8
- With the doors closed, place the cable following the steps and the path indicated in the
diagram. Start the process by adjusting it on the lock stopper of the door 1 (P1) using a
2.5mm Allen key.
4
- Then, tighten the cable and set it on the other lock stopper.
- Once the lock stoppers are fixed, fix the cable to the lock of
the base.
The lock can be disassembled from the Twin base and assembled to the other side if the
facility is reversed. To do this, you need to press the tabs at the base, as shown in the
diagram.
24
* The lock stopper has the ability to turn in case of inverse facilities. It
also offers the possibility to set the cable on both sides of the lock, which
makes installation easy.
Cable
ending
6
P2
5 2
P1
Cable Set-up
Cable
beginning
PF
1
3