Machine Information; Technical Specifications - VONROC S OS503DC Serie Traducción Del Manual Original

2. MACHINE INFORMATION

Intended use
The machine is designed for sanding wood, plas-
tics and metal. This machine is suitable only for dry
sanding. The machine is not suitable for processing
objects containing asbestos. Improper use may
damage the tool.

TECHNICAL SPECIFICATIONS

This manual has been drawn up for
different sets / article numbers. Check the
corresponding article number in below
specifications table for the correct
composition and contents of your set.
Model No. OS503DC
Batteries included -
Chargers included -
Voltage
No load speed
Sanding pad
diameter
Weight
Sound pressure
77.1 dB(A), K=3dB(A)
level LPA
Sound power level
88.1 dB(A), K=3dB(A)
LWA
Vibration 7.511 m/s
Model No.
Battery Type
Voltage
Capacity
Recommended charger
Weight
Model No.
Battery Type
Voltage
Capacity
Recommended charger
Weight
WWW.VONROC.COM
S_ S2_ S3_
OS503DC OS503DC OS503DC
2 x
CD801AA CD803AA
CD801AA
CD802AA
20V
5.000-10.000/min
125mm
1.20 kg
K=1.5 m/s
2 2
CD801AA
Lithium-Ion
20V
2.0 Ah
CD802AA
0.3 kg
CD803AA
Lithium-Ion
20V
4.0 Ah
CD802AA
0.65 kg
Model No.
Charger input
Charger output
Charging time 2Ah battery
Charging time 4Ah battery
Recommended batteries
Weight
Only use the following batteries of the VONROC
VPOWER 20V battery platform. Using any other
batteries could cause serious injury or damage the
tool.
CD801AA 20V, 2Ah Lithium-Ion
CD803AA 20V, 4Ah Lithium-Ion
The following charger of the can be used to charge
these batteries.
CD802AA Quick charger
The batteries of the VONROC VPOWER 20V battery
platform are interchangeable with all the VONROC
VPOWER 20V battery platform tools.
Vibration level
The vibration emission level stated in this instruc-
tion manual has been measured in accordance
with a standardised test given in EN 62841; it may
be used to compare one tool with another and as
a preliminary assessment of exposure to vibration
when using the tool for the applications mentioned:
- using the tool for different applications, or with
different or poorly maintainted accessories,
may significantly increase the exposure level
- the times when the tool is switched off or when
it is running but not actually doing the job, may
significantly reduce the exposure level.
Protect yourself against the effects of vibration by
maintaining the tool and its accessories, keeping
your hands warm, and organizing your work patterns.
DESCRIPTION
The numbers in the text refer to the diagrams on
page 2 and 3.
1. On/off switch
2. Dust bag
3. Speed adjustment wheel
4. Sanding pad
EN
CD802AA
220-240V, 50Hz 0.4A
21V 2.5A
60 minutes
120 minutes
CD801AA, CD803AA
0.36 kg
7