Machine Information; Technical Specifications - VONROC PS502DC Traducción Del Manual Original

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 32
thickness of 1.5 mm
. If you use an extension
2
cable reel, always fully unroll the cable.

2. MACHINE INFORMATION

Intended use
The machine is designed for sanding wood, plastics
and metal. This machine is suitable only for dry
sanding. The machine is not suitable for processing
objects containing asbestos. Improper use may
damage the tool.

TECHNICAL SPECIFICATIONS

This manual has been drawn up for
different sets / article numbers. Check the
corresponding article number in below
specifications table for the correct
composition and contents of your set.
Batteries
Model No.
included
PS502DC
-
S_PS502DC
CD801AA
S2_PS502DC
2 x CD801AA
S3_PS502DC
CD803AA
Machine information
Voltage
No-load speed
Sanding pad dimensions
Weight
Sound pressure level L
PA
Acoustic power level L
WA
Vibration
Model No.
Battery Type
Voltage
Capacity
Recommended charger
Weight
WWW.VONROC.COM
Chargers
included
-
CD802AA
CD802AA
CD802AA
20V
10.000/min
150x150x100 mm
0.68 kg
80.2dB(A) K=3dB(A)
91.2dB(A) K=3dB(A)
11.776m/s² K=1.5m/s²
CD801AA
Lithium-Ion
20V
2.0 Ah
CD802AA
0.3 kg
Model No.
Charger input
Charger output
Charging time 2Ah battery
Charging time 4Ah battery
Recommended batteries
Weight
Model No.
Battery Type
Voltage
Capacity
Recommended charger
Weight
Wear hearing protection.
Only use the following batteries of the VONROC
VPOWER 20V battery platform. Using any other bat-
teries could cause serious injury or damage the tool.
CD801AA
20V, 2Ah Lithium-Ion
CD803AA
20V, 4Ah Lithium-Ion
The following charger of the can be used to charge
these batteries.
CD802AA
Quick charger
The batteries of the VONROC VPOWER 20V battery
platform are interchangeable with all the VONROC
VPOWER 20V battery platform tools.
Vibration level
The vibration emission level stated in this instruction
manual has been measured in accordance with
a standardized test given in EN 62841; it may be
used to compare one tool with another and as a
preliminary assessment of exposure to vibration
when using the tool for the applications mentioned.
• Using the tool for different applications, or with
different or poorly maintained accessories, may
significantly increase the exposure level.
• The times when the tool is switched off or when
it is running but not actually doing the job, may
significantly reduce the exposure level.
EN
CD802AA
220-240V, 50Hz 0.4A
21V
2.5A
60 minutes
120 minutes
CD801AA, CD803AA
0.36 kg
CD803AA
Lithium-Ion
20V
4.0 Ah
CD802AA
0.65 kg
7

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

S_ps502dcS2_ps502dcS3_ps502dc

Tabla de contenido