Casals CCH24REAK Manual Del Usuario página 6

Chiseling
- Turn the selector (C) until points to (
- To modify the position of the chisel turn the selector
(C) until points to ( ). Rotate the chisel until the desired
position and turn the selector (C) until points to (
Electronic speed control:
- The speed of the appliance can be regulated by using the
speed regulator control (I). This function is very useful, as it
makes it possible to adapt the speed of the appliance to the
type of work that needs to be done.
- If the appliance works continuously at low speed, working
life of the appliance will be reduced considerably.
Locking button:
- Activating the locking button allows you to operate the
appliance without having to depress the run button
- To activate this function press button (J) while holding
down the run button (H).
- To deactivate this function press the run (H) button right
down.
Once you have finished using the appliance:
- Stop the appliance by releasing the on/off switch (H).
Cleaning
- Disconnect the appliance from the mains and allow it to
cool before undertaking any cleaning task.
- Allow it to cool before undertaking any cleaning task.
- Clean the electrical equipment and the mains connection
with a damp cloth and dry. DO NOT IMMERSE IN WATER
OR ANY OTHER LIQUID.
- Clean the equipment with a damp cloth with a few drops of
washing-up liquid and then dry.
- Do not use solvents, or products with an acid or base
pH such as bleach, or abrasive products, for cleaning the
appliance.
- Do not let water or any other liquid get into the air vents to
avoid damage to the inner parts of the appliance.
- Never submerge the appliance in water or any other liquid
or place it under running water.
- If the appliance is not in good condition of cleanliness, its
surface may degrade and inexorably affect the duration of
the appliance's useful life and could become unsafe to use.
Supplies
- Always use original supplies, designed specifically for your
appliance model.
- These supplies are available in specialist shops.
6
)
- Take the appliance to an authorised technical support
service if a product damage or other problems arise. Do not
) try to dismantle or repair without assistance, as this may
be dangerous.
- If the connection to the mains has been damaged, it must
be replaced and you should proceed as you would in the
case of damage.
Specifications:
- Rated power (W):
- Rated Voltage
- No load speed (rpm):
- Blows per minute (ipm)
- Impact Energy (J)
- Maximum capacity in concrete (mm)
- Weight (Kg:)
- Sound Pressure level
- Sound Power level
- Instantaneous sound pressure level
- Vibration
- Not suitable for use in presence of flammable anaesthetic
mixture with air or with Oxygen or nitrous oxide
NB: These specifications are subject to change without no-
tice of purpose of improvement.
For EU product versions and/or in case that it is re-
quested in your country:
Ecology and recyclability of the product
- The materials of which the packaging of this appliance
consists are included in a collection, classification and recy-
cling system. Should you wish to dispose of them, use the
appropriate public recycling bins for each type of material.
- The product does not contain concentrations of substanc-
es that could be considered harmful to the environment.
Anomalies and repair
(LpCpeak) = 105dB(C), KpCpeak = 3dB
- This symbol means that in case you wish to
dispose of the product once its working life has
ended, take it to an authorised waste agent for
the selective collection of Waste from Electric
and Electronic Equipment (WEEE).
CCH24REAK
620
230V~
0-1000
0-4850
2,2
24
2.7
(LpA) = 90.6dB(A), KpA = 3dB
(LwA) = 101.6dB(A), KWA = 3dB
11.367 m/s2, K= 1.5 m/s2
Decla
produ
CCH2
docum
60745
EN 61
europ
Albert
Comm