Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Charging the power station
Make sure the supplied current adapter
is to be powered by the correct voltage
(110 V ~). Use only the adapter supplied
with this unit.
1. Make sure all power station switches are
set to off.
2. Open the cover on the charging jack.
3. Connect the charging adapter to an
outlet and into the power station's charging
jack. The charging Indicator flashes during
the charging process.
The initial charge in the battery can take up
to 24 hours. Do not charge for more than
48 hours.
4. After charging the battery, disconnect
the adapter from the AC outlet first, then
from the charging jack. Then replace the
dust cover on the charging jack.
During charge, the indicator light is red, and will turn from red to green
when charging is complete.
8 8
Charging Socket
cator
LED Work Light
Low
ed
igh
Charging Socket
USB Indicator
Batter
te t
te t
USE
USB
USB Switch
Light Switch
5V@500mA
Publicidad
Tabla de contenido
