Steren JMP-100 Manual De Instrucciones página 33

PROBLEM
The jump starter
does not turns on
SPECIFICATIONS
Input: 15 V --- 1 A
Output: 12 V ---
5 V --- 1 A (USB)
Internal battery: 7 Ah 12 V
Maximum compressor pressure: 250 PSI
Power converter
Input: 110-240 V~ 50/60 Hz 15 W max.
Output: 15 V --- 1 A
Product design and specifications are subject to change, without notice.
16 16
• Press the battery status button; recharge the unit if needed.
• Make sure the polarity in the connections is right.
• Check the fuse, replace it if needed replace with one of the same
type. (F2AL250V)
SOLUTIONS