Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
7. Place the safety switch in the "ON"
position.
8. Inside the vehicle, turn on the ignition
switch and try to start the engine. Crank a
maximum of three seconds. If the engine
does not start, wait three minutes before
the next attempt.
- After the engine starts, turn off the Jumper
Safety Switch.
9. Disconnect the black clamp first, and
then the red one.
10. Be sure that the cables and clamps are securely stored.
11. Recharge the power station as soon as convenient.
If the engine does not start, there may be a problem other than a
discharged battery.
14
14
Publicidad
Tabla de contenido
