Lanaform Bubble Footcare Manual Del Usuario página 5

of 15 minutes. It must then be turned off so that the motor
can cool down for at least 15 minutes.
· Without medical approval, it is strongly recommended
that the "BUBBLE FOOTCARE" appliance should not be used
by pregnant women, people subject to thrombosis or who
suffer from bodily pain for which the cause has not been
identified or by people who wear a heart pacemaker. The
appliance is also not recommended for use by diabetics.
INSTRUCTIONS
1) Details:
• Very high quality stylish bubble bath.
• Equipped with pedicure accessories.
• Practical thanks to its pouring spout.
• Maintains heat.
• Vibrating massage (with or without water).
• Bubble action (70 air jets).
• 4 removable massage rollers.
• Stimulating acupressure surface that massages the
soles of the feet (400 acupressure points).
2) Description of the «BUBBLE FOOTCARE»:
Diagram (Fig 1 & Fig 2):
1 Rotating control switch
2 Accessories compartment lid
3 Rotating head (pedicure accessories)
4 Air jets
5 Acupressure points
6 Pouring spout
7 Power cable
8 Plug
9 Removable rollers
10 Pedicure accessorie
3) Using the «BUBBLE FOOTCARE»:
1 Place the appliance on a flat, stable and hard surface with
a non-slip mat nearby in order to prevent the risk of falling.
2 Fill the appliance (with water at the desired temperature)
up to the "MAX" level. Never exceed this level.
3 Check that the appliance is in the "0" position before
plugging it into the mains supply. Also make sure your
hands are not wet and your feet are not in the water.
4 Sit on a chair and place your feet into the water. Never
stand up in the "BUBBLE FOOTCARE".
5 Then select the type of massage desired:
EN FR NL DE ES IT PL CS SK HU SL HR RU AR FA
The functions available are:
Heat + Bubbles (1) (Fig 3):
• Turn the switch to position 1.
• This function provides a relaxing foot bath thanks to the
generation of bubbles in water that is kept at a constant
temperature.
Heat + Bubbles + Vibrations (2) (Fig 4):
• Turn the switch to position 2.
• This function provides a unique vibrating massage and a
relaxing foot bath thanks to the generation of bubbles in
water that is kept at a constant temperature.
Vibrations (3) (Fig 5):
• Turn the switch to position 3.
• This function provides a unique vibrating massage (only
option that can be used with or without water).
Accessories:
• To benefit from an invigorating and stimulating massage,
use the acupressure points and the four removable rollers
that can be attached by gentle pressure.
• A pedicure set (Fig 6 & Fig 8) is also provided comprising:
· A massaging head.
· An abrasive head.
· A head fitted with a brush.
In order to fit the desired accessory, simply press it
gently onto the rotating head.
• In general, the massage should not last more than 10
to 15 minutes.
• Once you have finished your massage, return the switch
to the «0» position before unplugging the appliance.
Finally empty the appliance.
MAINTENANCE
Storage:
• Place the massage appliance in its box or in a dry place.
• Prevent the appliance from coming into contact with
sharp or pointed objects which could damage the outside
surface.
• Do not wrap the power cord around the appliance. (This
could cause wear and tear and break the cord).
Cleaning:
• Make sure you unplug the device and allow it to cool
down before cleaning it.
• Do not immerse the «BUBBLE FOOTCARE» in water or
any other liquid in order to clean it. Use a gentle detergent
Bubble Footcare
5
/ 52