Replacing The Belt & Brush Roll - Bissell POWERFORCE POWERBRUSH PET 2910 Serie Manual Del Usuario

Replacing the Belt & Brush Roll
For maintenance how-to videos, visit support.BISSELL.com.
1.
Turn OFF and unplug your
machine. Use a Phillips-head
screwdriver to remove the
3 screws.
4.
Pull belt off of motor shaft.
7.
Align Brush Roll mount to
screw post.
Any other maintenance or servicing not included in this manual should be performed by an
authorized service representative.
WARNING
electrical outlet before performing maintenance or troubleshooting.
2.
Remove belt cover.
5.
Wrap new belt around
motor shaft.
8.
Reposition belt cover.
To reduce the risk of fire, electric shock or injury, turn power OFF and disconnect plug from
3.
Pull Brush Roll out and
remove belt from track.
6.
Put the belt on the Brush
Roll track. Put the Brush Roll
back into position.
9.
Reinstall 3 screws.
BISSELL.com 7